The perfect product to use when fishing a lead clip “naked” i.e. when not using rig tubing or leadcore. Primarily designed for use with zig rigs when using a lead clip, these “naked” tail rubbers will help avoid tangles associated with this type of fishing. There is no need to use anti tangle tubing as the rig is nearly always going to be longer than the tubing.

Traditionally when using a standard tail rubber and no tubing, the difference in diameter can cause the zig rig to tangle around the mainline. These specially designed Naked Tail Rubbers have a long tail that tapers down to a tiny bore, creating a seamless join to the main line. These can be used will all Korda lead clips including Hybrid lead clips.

Quantity: Packs of 10

Colours: Weed/Silt and Clay/Gravel

These tapered rubber Anti Tangle Sleeves neatly slide over the eye of your hook link swivel and help to reduce the chances of your rig becoming tangled whilst it is being cast out. They are soft enough to easily slide over a swivel eye, but also have enough rigidity to kick your rig away from your main line – which is especially useful when fishing with zig rigs. They are also perfect for use with our QC (quick change) clips to neatly finish off the rig and allow it to be changed quickly when needed. You can match them to the type of lakebed that you are fishing over, and the rest of your rig components, as they come in clay, gravel, silt, or weed versions. Pack of 25.

Tail Rubbers are streamlined rubber sleeves that have been designed to perfectly fit onto lead clips and inline leads, to give your lead systems a more streamlined profile. This helps to reduce tangles. These durable Tail Rubbers are available in weed green, gravel brown, clay, or silt colours, to match all lake bed conditions! They come in packs of ten.

Our original Lead Clip was designed to allow your lead to release in situations where you needed it to, such as if you got snagged or a fish went through thick weed. But the lead won’t come off as easily as it will with our Quick Release Lead Clip, and so avoids unnecessarily dumping leads, unless you really need to for the safety of a fish. The plastic retaining arm is strong enough to take even the hardest cast with a heavy lead without fear of it breaking, and the back end of the main body of the Lead Clip has grooves which help the Tail Rubber to stay on and only come off when it needs to. You can alter the ease with which it releases the lead, dependent on how far you push the Tail Rubber onto the body. To achieve an easy release of the lead, you need to ensure that the Lead Clip can’t run freely on the line, and it is designed such that a size 8 Swivel will fit snugly into the nose of it and will remain in place. This is a very safe semi-fixed set-up, and if used correctly will ensure that the fish can always get rid of your lead, even if your main line breaks. The Lead Clip comes in a choice of colours – Clay; Weed; Silt; or Gravel – with ten in each pack.  

The Multi Lead Clip is a universal lead system which can either be set to eject the lead as per a conventional lead clip or fished running style to confuse those extremely wary carp.

DF and the Korda boys who fish Gigantica every year have been using this ‘running style’ lead clip for many years and has proven to be one of the very best set-ups for hooking the extremely pressured carp on the Main Lake. The running method works by removing any pivot point which may help the carp eject the hook; the lead continues to slide up the main line as the fish pulls against it.

To force the lead to eject when snagged, use the supplied pins to plug the swivel or Kwik Link into the clip. This will lock the lead clip in to place and allow the lead to be ejected. Compatible with all tail rubbers in the Korda range but ensure the clip is wet before pushing on and for fish safety, never push the tail rubber on fully.

To fish running, do not plug the Swivel or Kwik Link, allowing the lead to slide up the main line.

Available in Weed/Silt and Gravel/Clay

This is a quick change version of our original Hybrid Lead Clip, and allows you to quickly and easily change hook, simply by clipping on a new one, as long as it has a loop tied in the end of it. The Hybrid Lead Clip QC has been designed so that it will eject the lead if it gets stuck in weed or snags, and so that it can also be used in conjunction with leader materials such as leadcore, which form too bulky a knot to work with our normal Lead Clips. The clip features an integrally moulded QC Swivel, with a metal loop at the other end of it, which your main line or leader is tied to. Because the swivel can’t pull free from the housing, it works whenever the lead needs to be ejected. The streamlined, one-piece design means there are no fiddly locking pegs or hinges to worry about - just connect the leader to one end and the rig to the other! The uprated arm allows leads up to 5oz to be cast safely even at extreme range and the clip is available in Weed/Silt or Gravel/Clay, with eight in a packet.

The Hybrid Tail Rubber is designed to be used with our Hybrid Lead Clips in situations where you are using thicker leader materials which create a bulkier knot. These tail rubbers have a larger internal cavity so that they can be fitted over bulkier knots whilst still fitting neatly onto the lead clip, and allowing the lead to eject when it needs to, without becoming jammed in place – just ensure the clip is moistened before you push the rubber on. Hybrid Tail Rubbers are available in two colours - Weed/Silt or Gravel/Clay – to blend in with any lake bed, and you get ten in a pack.

Since its release, the Hybrid Lead Clip has established itself as the best clip on the market. It has one very simple purpose, and that's to help you ditch the lead if the fish you hook becomes snagged. The design features an integrally moulded Ring Swivel, ensuring that the swivel simply cannot pull free from its housing. This forces lead ejection in the event of it becoming jammed, meaning that carp can be landed easily in weedy, snaggy conditions. The streamlined, one-piece design means there are no fiddly locking pegs or hinges to worry about - just connect the leader to one end and the rig to the other! The uprated arm allows leads up to 5oz to be cast safely even at extreme range and the clip is available in all four of the key Safe Zone colours: weedy green, clay, gravel and silt. You get eight in a pack.

The Heli-Safe Tubing Kit enables you to overcome Leadcore and Leaders bans by allowing you to fish a helicopter style of rig using rig tubing. This conversion kit allows the Heli-Safe System to be used with tubing whilst retaining all of the usual features of a traditional helicopter set-up and giving you the ability to drop the lead if you need to.

As you know, helicopter set-ups have great anti-tangle properties, you’re able to cast them a long way and they allow the top bead (recently update to a on this kit) to be set to determine how the hook link settles on the bottom. 

For those of you that don’t use heli type rigs… you can basically adjust the bead to allow for what your rig is landing on. If it’s on a hard bottom the distance can be short, low lying weed the distance can be increased and for something like deep silt it can be pushed right up, allowing the lead to plug into the silt but leave the rig to settle on top.

The solution to the problem may look very simple, but a lot of thought and testing has gone into getting the Heli-Safe Tubing Kit just right, so that it performs in the intended way in terms of still dropping the lead.

INCLUDE THIS WITH THE ABILITY TO TAKE IT OUT

We did initially release this product back in 2018 but after it come to our attention that some of the Tungsten Beads – designed to fit snugly onto rig tube had suffered an issue during the manufacturing process. They were too tight when used on Dark Matter Rig Tube, creating a potential safety issue with the setup. We removed the product from shelves as a precautionary measure as our priority has always been to ensure carp remain safe with anglers when using our products. We have since replaced the tungsten bead with a silicone sleeve combined with our brilliant No Trace Bead.

This small plug is known as a ‘witch’s hat’ and is located inside the Heli-Safe, it’s part of the very clever design and holds the tubing in place. When used in conjunction with an adapted Heli-Safe ‘cap’, featuring a hard plastic ‘tail’, this ensures that the tubing can’t come loose and that the system works as it was originally intended to. The ‘witch’s hat’ is the cleverest part of this product, as it holds the tubing securely in place… it can be used with either our Dark Matter tungsten or plastic Kamo rig tubing.

The Heli-Safe Tubing Kit is sold in packs that include everything that you need for two complete set-ups (excluding the tubing). They also come in a choice of brown or green to match the lakebed.

The Mini Heli-Safe is a scaled down, compact version of the original and retains all of the features that helped to make it such a huge success… plus a few more. 

It still works in exactly the same way, which was revolutionary when the Heli-Safe first hit the market. We were able to arm anglers with a way to fish any helicopter style presentation, but with the ability to drop the lead as soon as a fish was hooked. This was a massive advantage in weedy or snaggy situations, or when using set-ups such as chod rigs. 

The Heli-Safe also allowed anglers to fish in this way quickly and effectively, simply by attaching a lead to the system, and the product did the rest, releasing the lead as soon as your hook link swivel pulled against the top of the bead. Technology has moved on since then, and we have managed to make the system much smaller, which not only makes it less obtrusive on the lake bed; but also reduces drag through the air and will improve your distance when fishing at extreme range; as well as making it less likely to get caught in weed or snags during the fight, once the lead has been jettisoned. 

This ingenious system revolutionised fishing with helicopter rigs, as it meant that leads could consistently be discharged as soon as you hooked a fish, whenever the situation meant that this was essential. As well as dropping the lead when you are fishing in very weedy or snaggy situations, it is also popular with anyone using a chod rig, where ejecting the lead increases your chances of landing a fish, especially at long range where a heavy lead is being used. There is also the option though to fit a small plastic collar (supplied) which fixes the lead in place, for use in situations where dropping it isn’t necessary, but you still want the versatility that the Heli-Safe System offers. It can be used in conjunction with leaders – such as any ring swivel leader in our Dark Matter or Kable Leadcore ranges, which can be adapted to fit the Heli-Safe bead – or with a naked set-up with your main line straight through to it. Heli-Safe System works perfectly in conjunction with our Leadcore Chod Safety or Naked Chod Safety systems. Each pack contains two Heli-Safe beads, in a choice of green or brown, along with all the bits you need to make it work – including instructions.

This has been designed for a multitude of uses. Its unique shape helps to prevent tangles and the cavity at the narrower end will hold a size 8 swivel securely within it. The Shok Bead is ideal for running rigs, marker floats or any set up that requires a buffer bead, and it comes in a low-viz green colour. Pack of 15.

This innovative system was designed by Jason Hayward to allow you to fish an inline lead in the weed, as it will eject from the stem when it needs to. The mechanism has been designed so that it will withstand even the hardest cast, but should the lead get stuck in weed or a snag, then it will release – but only does so when necessary. It can be used with any type of leader or tubing, or on a naked set-up, and is compatible with solid PVA bags, but it is best to avoid Funnel Web ones as these can cause it to eject as it hits the surface. The insert has a ring swivel moulded into it, but you can cut the ring off if you prefer to use a normal swivel, or add a Kwik Link or similar. A Tail Rubber holds everything in place, as long as it is pushed on tightly, and the leads and inserts are numbered to ensure that you get the correct combination, which fits together properly. The leads are a flat pear shape, which makes it perfect for most situations other than extreme range, and come in a choice of 2oz, 2.5oz, 3oz, and 3.5oz. Spare leads are available separately. Each kit includes a lead, insert, and tail rubber.

THIS ITEM IS LEADS ONLY, 3 x Leads

This innovative system was designed by Jason Hayward to allow you to fish an inline lead in the weed, as it will eject from the stem when it needs to. The mechanism has been designed so that it will withstand even the hardest cast, but should the lead get stuck in weed or a snag, then it will release – but only does so when necessary.

It can be used with any type of leader or tubing, or on a naked set-up, and is compatible with solid PVA bags, but it is best to avoid Funnel Web ones as these can cause it to eject as it hits the surface. The insert has a ring swivel moulded into it, but you can cut the ring off if you prefer to use a normal swivel, or add a Kwik Link or similar. A Tail Rubber holds everything in place, as long as it is pushed on tightly, and the leads and inserts are numbered to ensure that you get the correct combination, which fits together properly. The leads are a flat pear shape, which makes it perfect for most situations other than extreme range, and come in a choice of 2oz, 2.5oz, 3oz, and 3.5oz.